A C-arm that takes good images but cannot send them to PACS creates real problems: missing images in the chart, staff burning discs, studies filed under the wrong patient. For hospitals, surgery centers and clinics in Beaumont and the Golden Triangle, connecting the C-arm properly is as important as choosing it. This guide covers the image side of C-arm rental, C-arm repair and C-arm sales in Beaumont. You can browse units on our medical equipment page or request a short-term unit through our medical equipment rental service.
The basics: DICOM and PACS
DICOM is the international standard for storing and sending medical images, maintained at dicomstandard.org. A C-arm workstation that supports DICOM can send images to your PACS, pull patient details from a modality worklist and, on many systems, report radiation dose. Each of these is a separate feature, and older or base-level C-arms may support only some of them. Before you rent or buy, ask which DICOM services the workstation supports and whether any are optional licenses.
Common C-arm image problems and fixes
Images will not send to PACS
Usually a network setting: the PACS address, port or the C-arm's application entity title (AE title) does not match what PACS expects, or the network port in the OR is not active. Your PACS team and our engineer can test the connection together.
Studies land under the wrong patient
Often caused by typing patient details by hand. A modality worklist lets staff select the scheduled patient instead, which reduces errors.
The workstation is full
Local storage fills if images are not sent or deleted after sending. Set an auto-delete rule for images that have been confirmed in PACS.
Image dates and times are wrong
A drifting clock on the workstation causes studies to sort incorrectly. Sync the clock to your network time source.
Images look different in PACS
Display settings and processing can differ between the C-arm monitor and PACS viewers. Check the export settings and the viewer calibration.
A connection checklist for go-live
- Assign an IP address and confirm the network port in each room where the C-arm will be used.
- Add the C-arm's AE title to PACS and the worklist server.
- Send test images and confirm they appear correctly in PACS.
- Test the worklist with a test patient.
- Set storage and auto-delete rules on the workstation.
- Document the settings so they can be restored after a repair or software update.
Protecting patient data on the C-arm
C-arm workstations store patient names, dates and images, so they hold protected health information. The HHS HIPAA Security Rule guidance applies to that data. Restrict access, keep the workstation on a protected network, and make sure images are removed before a rental is returned, a unit goes for off-site repair or a C-arm is sold. Our medical equipment disposition service documents data removal when you retire a unit.
Renting a C-arm in Beaumont
Rental units need the same network setup as your own C-arm. Tell us in advance which PACS you use, and have your IT team ready on delivery day so images flow from the first case. Beaumont is roughly 290 miles from our Garland headquarters, so we confirm delivery dates when you book.
Buying a C-arm with the right workstation
When buying new or refurbished, check the workstation software version, DICOM features, storage size and whether dose reports can be exported. A refurbished unit with an outdated workstation may need a software update to work with your PACS. Refurbished C-arms from Mr. Biomed Tech Services come with a 90-day warranty. See our C-arm machine guide for models and features.
C-arm repair in Beaumont
Workstation and network faults are a common cause of C-arm service calls, alongside image chain and mechanical problems. Our C-arm repair and service in Houston team covers Beaumont and Southeast Texas, with on-site visits scheduled in advance. Service requests receive a response in under 8 business hours, Monday through Friday. For other equipment, see our medical equipment repair in Houston and our Houston service area.
C-arm rental, repair and sale in Beaumont: FAQs
Can a rental C-arm send images to our PACS?
Yes, if the workstation supports DICOM. We configure it with your IT team at delivery.
Why are C-arm images missing from PACS?
Common causes are network settings, a mismatched AE title or images left unsent on the workstation.
Do you remove patient data before a C-arm leaves our facility?
Yes. We remove images and document it for returned, repaired or retired units.
Do refurbished C-arms have a warranty?
Yes, a 90-day warranty.
Mr. Biomed Tech Services is an independent provider and is not affiliated with any C-arm or PACS manufacturer.
After software updates and repairs
Network settings can be lost when a workstation is repaired, its hard drive replaced or its software updated. After any such work, send a test image to PACS and run a worklist query before the next case. Keeping a written copy of the settings makes recovery quick.
For C-arm rental, repair or sales in Beaumont, call (469) 767-8853 or contact us.
Leave a Comment
Comments [0]
No comments available for this blog.