For years, buying an exam table in Dallas came down to price, upholstery color and whether staff wanted drawers. A federal rule has changed that. Most practices that bill Medicare or Medicaid now need at least one exam table that lowers far enough for a patient to move across from a wheelchair. This page explains what that means in practice, compares manual, power and accessible tables, and covers what to plan before delivery.
Mr. Biomed Tech Services sells new and refurbished exam tables as part of our medical equipment for sale, with delivery and setup across Dallas–Fort Worth from our Garland headquarters.
Quick answers
Does my practice need an accessible exam table? If your practice receives HHS funding, including Medicare, Medicaid or CHIP payments, and you use exam tables, the answer is very likely yes. The HHS fact sheet on the Section 504 rule says covered practices must have at least one accessible exam table and one accessible weight scale, and the Texas Medical Association reported the deadline for that as July 8, 2026.
What makes a table "accessible"? HHS adopted the U.S. Access Board standards. For exam tables, the transfer surface must lower to between 17 and 19 inches from the floor and adjust up to 25 inches, and the table must work with a portable patient lift. The ADA National Network fact sheet adds the other basics: a transfer surface at least 30 inches wide, and rails or supports a patient can hold during the transfer.
Do I have to replace every table? No. The rule does not require practices to replace working equipment. Tables you acquire from July 8, 2024 onward must be accessible until you reach the required share, which is 10 percent (at least one) for most practices and 20 percent for rehabilitation and physical therapy providers.
Rules like this can be amended or challenged, so check current guidance from the HHS Office for Civil Rights or your own counsel before you plan purchases around it.
Manual, power and accessible tables compared
| Type | Height | Good fit | Watch for |
|---|---|---|---|
| Manual (box or step-stool) table | Fixed, usually around 30 inches or higher | Low-volume rooms where patients can step up | Does not meet the transfer height; can't serve wheelchair users |
| Power height-adjustable table | Varies by model; some lower close to the standard, some don't | Busy primary care and specialty rooms | Check the lowest seat height on the specification sheet, not the brochure |
| Accessible power table | Lowers to 17–19 inches, raises to at least 25 inches | Your required accessible room, and any table you acquire now | Needs an outlet and side clearance for wheelchair and lift access |
Five things to check on any table
- Lowest transfer height, measured to the top of the cushion, as stated on the manufacturer's specification sheet.
- Weight capacity for your patient population, especially for power tables that lift the patient.
- Transfer supports: side rails or handles that lock in place and stay within reach.
- Positioning: back section, Trendelenburg and leg sections or stirrups, depending on specialty.
- Upholstery: seamless and intact so it can be disinfected between patients; torn covers should be replaced.
Planning the room
- Clearance: leave space on at least one long side so a wheelchair can pull alongside the table, and room for a portable lift if you use one.
- Power: power tables need a nearby outlet; keep cords out of the transfer path.
- Placement: HHS expects accessible equipment to be located where patients with disabilities can readily use it, so avoid putting it in the smallest room at the end of the hall.
- Training: staff need to know how to lower the table, lock it and help a patient transfer. Plan a short session on delivery day.
If your practice is not there yet
If the July 2026 date has passed and your rooms still have only fixed-height tables, start with one room. Choose the exam room closest to the entrance with enough floor space for a wheelchair beside the table, put the accessible table there, and make sure scheduling staff know to book patients who need it into that room. Then add an accessible weight scale, which the same rule requires. Keep a short written record of the purchase date and the table model in your equipment file, so you can show what you have if anyone asks.
Refurbished tables
A refurbished power table can be a practical way to add accessible capacity without new-equipment pricing, provided it meets the height standard. Before delivery, our engineers run the table through its full range of motion, test the actuators, hand and foot controls and emergency stop, check the rails and locks, and complete an electrical safety test. Reconditioned tables come with our 90-day warranty. Manual tables are inspected for frame, drawer and upholstery condition.
Delivery and setup in Dallas
For in-stock tables, delivery and setup can usually be scheduled the same day across Dallas–Fort Worth. We measure doorways and turns in advance, place the table, confirm the controls work in its final position, and show staff the low transfer setting. If you are furnishing the whole room, our Dallas exam chair guide covers procedure chairs by specialty, and our medical equipment inspection service can keep power tables on an annual safety schedule.
To ask about accessible exam tables in stock, call (469) 767-8853 or send us a request with the room size and your specialty.
Leave a Comment
Comments [0]
No comments available for this blog.