Pain clinics, surgery centers and hospitals in El Paso use C-arms every day, and Texas has specific rules for how fluoroscopy is registered, tested and documented. A C-arm that is rented, bought or repaired without those steps in place can create problems at inspection time. This checklist pulls the main Texas requirements together for El Paso facilities and shows how C-arm rental, C-arm repair and C-arm sales fit around them. It is a practical guide, not legal advice; always confirm details with Texas DSHS and your radiation safety officer. Browse units on our medical equipment page.
1. Register the C-arm with Texas DSHS
Radiation machines used in Texas must be registered with the Department of State Health Services. The DSHS X-ray laws and rules page lists the rules, including 25 TAC §289.226 and §289.227. Before a new, used or rented C-arm is used on patients, confirm your registration covers it, and update the registration when units are added, moved or disposed of.
2. Form a radiation protocol committee if you perform interventional procedures
According to the DSHS question-and-answer guide to §289.227, every registrant performing fluoroscopically guided interventional procedures needs a radiation protocol committee, and that includes pain clinics and facilities that use only a C-arm. The guide states that:
- The committee includes a licensed physician, a licensed medical physicist and the radiation safety officer, plus others the facility chooses.
- It meets and reviews protocols at intervals not exceeding 14 months.
- Several facilities may share a cooperative committee if each has a representative.
- Previous protocol versions and meeting records are kept for 5 years.
- The committee sets reference levels for procedures and decides what happens, including patient follow-up, when a reference level is exceeded.
3. Record dose information for each procedure
The same DSHS guide lists what to record for fluoroscopic procedures: patient identification, the type and date of the exam, which fluoroscopic system was used, and the cumulative air kerma or dose-area product if the system displays it. If it does not, record the fluoroscopic mode, cumulative fluoroscopy time and the number of recorded exposures. When choosing a C-arm, a unit that displays and exports dose makes this much easier.
4. Keep equipment testing current
C-arms need periodic equipment performance evaluations by or under the supervision of a licensed medical physicist, plus preventive maintenance and electrical safety testing. Check the interval that applies to your equipment with your physicist. Our guide to annual C-arm inspection in Texas explains what is tested, and our medical equipment inspection service keeps the records together.
5. Confirm operator credentials
Make sure everyone who operates the C-arm holds the credentials Texas requires for their role. The Texas Medical Board oversees medical radiologic technologist certification in Texas.
6. Protect staff and document training
Keep records of radiation safety training, dosimetry reports and apron inspections. Federal equipment rules in 21 CFR 1020.32 cover the C-arm itself; your program covers how it is used.
How compliance affects rental, purchase and repair
| Event | Compliance step |
|---|---|
| Renting a C-arm | Confirm registration covers it; add it to your protocols and dose records |
| Buying new or refurbished | Register, complete the performance evaluation before clinical use, update protocols |
| Major repair (tube, detector, generator) | Physicist review or re-evaluation as required before returning to service |
| Retiring a unit | Update registration; remove patient data |
Renting and buying in El Paso
El Paso is roughly 630 miles from our Garland headquarters, so rentals and purchases should be planned ahead. Rentals are available through our medical equipment rental service, and refurbished C-arms from Mr. Biomed Tech Services come with a 90-day warranty. Pain clinics can also read our guide to C-arms for injection practices in El Paso.
Repair and service in El Paso
We provide on-site setup and service in El Paso, with visits scheduled in advance, and service requests receive a response in under 8 business hours, Monday through Friday. Our C-arm repair and service in Texas covers image chain, generator, mechanical and software repairs. For help organizing equipment programs, see our equipment planning and consulting service.
C-arm rental, repair and sale in El Paso: FAQs
Does a pain clinic with one C-arm need a radiation protocol committee?
According to DSHS guidance, yes, if it performs fluoroscopically guided interventional procedures.
What dose information must be recorded?
Cumulative air kerma or dose-area product if displayed; otherwise mode, fluoroscopy time and number of recorded exposures, plus patient and exam details.
Does a rented C-arm need registration?
Yes. Confirm your DSHS registration covers it before use.
Do refurbished C-arms have a warranty?
Yes, a 90-day warranty.
Mr. Biomed Tech Services is an independent provider and is not affiliated with any C-arm manufacturer. This article is general information, not legal advice.
Keep one compliance binder per C-arm
Store the registration details, physicist reports, maintenance and repair records, protocol committee minutes and dose logs together, on paper or in a shared folder. When an inspector visits, everything is in one place.
For C-arm rental, repair or sales in El Paso, call (469) 767-8853 or contact us.
Leave a Comment
Comments [0]
No comments available for this blog.