Every hospital bed has a specification sheet, and it answers most of the questions that decide whether a bed fits your patients, your rooms and your staff. But spec sheets are dense, use manufacturer terms, and are easy to misread: a height that includes casters but not the mattress, a width with the rails down rather than up. For College Station clinics, nursing facilities, home health agencies and families, this guide explains how to read a bed spec sheet line by line. Beds are part of our new and refurbished medical equipment for sale.
A real example
To make this concrete, here are a few lines from the published specification sheet for the Stryker S3 med-surg bed:
| Line on the sheet | Value | What to take from it |
|---|---|---|
| Weight capacity | 500 lb (227 kg) | The safe working load; check whether it includes the mattress and accessories |
| Deck height, low | 16 in, with 6-inch casters | Height of the deck, not the top of the mattress; add the mattress thickness for the real sitting height |
| Deck height, high | 30 in | Working height for caregivers |
| Overall length | 95 in | Needed to check room fit and turning in corridors and elevators |
| Overall width | 41.5 in rails up; 39.5 in rails down | Use the larger figure for doorways and room planning |
Every manufacturer publishes similar figures. The point is to read each number with its conditions.
Weight capacity
Look for the term used: safe working load, weight capacity or patient weight limit. Some sheets give the patient limit; others give a total that includes the mattress and accessories. Some beds have different limits in certain positions. Choose a bed with a clear margin above your heaviest regular patients.
Heights
Deck height is measured to the platform the mattress sits on. A 6-inch mattress on a 16-inch deck gives a sleep surface around 22 inches high. Check which casters the height assumes, since larger casters raise the bed. For fall risk, the lowest height with the mattress fitted is what matters; for caregivers, the highest.
Dimensions
- Overall length and width: for doorways, elevators and room layout.
- Sleep surface (mattress) size: for linens, mattress replacement and patient fit.
- Width with rails up and down: rails often add a few inches.
- Under-bed clearance: important if a mobile patient lift must roll underneath.
Articulation
The sheet lists the angles each section reaches: head (back) section, knee section, and Trendelenburg or reverse Trendelenburg if fitted. If your care plans specify head elevation, check the range and whether the bed shows the angle. Our guide to bed positions explains each position.
Electrical
Look for voltage, current draw and whether a backup battery is included. Check the plug type against your outlets and whether the bed needs a dedicated circuit. Note any auxiliary outlets on the bed and their limits.
Standard and optional features
Spec sheets often separate standard features from options: scale, bed-exit system, nurse call connection, side rail communications, motorized drive. A refurbished bed may or may not have the options listed on the sheet, so confirm each one on the specific bed.
Compatible mattresses and accessories
The sheet or manual lists compatible mattress sizes and accessories. Using a mattress outside that list can create gaps between the mattress and rails. Check this before buying any replacement surface.
Using the spec sheet when buying
- Get the sheet for the exact model and generation.
- Mark the numbers that matter for your patients and rooms.
- Measure your doorways, rooms and lifts against the overall dimensions.
- Check options against what the specific bed actually has.
- Keep the sheet with the bed's records.
Delivery and service in College Station
College Station is about 180 miles from our Garland headquarters. We confirm delivery dates when you order and provide on-site setup and service visits, scheduled in advance. Service requests receive a response in under 8 business hours, Monday through Friday. Reconditioned beds carry a 90-day warranty. For more on choosing bed types, see our guide to types of hospital beds.
What a spec sheet won't tell you
A specification sheet describes the bed as it left the factory. It can't tell you whether a particular used bed still meets those figures: whether the battery holds a charge, the scale reads accurately, the rails latch properly or the actuators run smoothly. For a refurbished bed, ask for the test record alongside the spec sheet. The spec sheet tells you what the bed should do; the test record tells you whether this one does.
It also won't tell you how the bed feels to use. If you can, see the bed in person or ask for a short video showing the controls, rails and positions, and have the staff who will use it try the hand control and rails before you buy several.
Comparing two models
When choosing between models, put the key lines side by side: capacity, lowest and highest heights, overall size, sleep surface, positions and options. Highlight any line where one model doesn't meet your needs, and you will usually find the decision makes itself.
Already own beds that are not performing to spec? Our hospital bed repair service can test them against the manufacturer's specifications.
To get the spec sheet for a bed we have available, call (469) 767-8853 or send us a request.
Shop hospital beds and other patient-care equipment online at our store, Mr. Bedmed.
Need a bed for a short stay at home or a census surge? See our hospital bed rental options across Texas.
On a budget? See our used hospital beds for sale, reconditioned and tested.
Leave a Comment
Comments [0]
No comments available for this blog.