Adult family homes are a large part of long-term care in Washington. Instead of a big facility, a licensed provider cares for a small group of residents in a regular house, and each resident usually has a bedroom of their own. Most of those bedrooms end up holding a hospital bed. If you run or are opening an adult family home in Yakima, this guide walks through how to choose beds that fit residential rooms, resident needs and a small-business budget. You can browse the beds and other equipment we stock on our medical equipment page.

How adult family homes differ from facilities
Adult family homes in Washington are licensed by the Department of Social and Health Services (DSHS) and can care for up to six residents, or up to eight with DSHS approval, according to the DSHS adult family home page. That small scale changes how you buy beds. You are not outfitting a ward. You are furnishing six to eight bedrooms in a house, each with its own doorway width, floor surface and furniture layout, and each matched to one person whose needs may change over months or years.
It also changes how you think about downtime. A hospital can move a patient to another bed while one is repaired. A six-bed home usually has no spare, so a failed motor or hand control affects a resident directly until it is fixed. Reliability and quick access to parts matter more than extra features.
Matching the bed to the resident
Start with the residents you serve now and the ones you expect to admit. A few questions narrow the choice quickly:
- Mobility. Residents who still stand and transfer on their own benefit from a bed that lowers close to the floor and raises to a comfortable sitting height for getting up.
- Fall risk. For residents with dementia or a history of falls, a low bed with floor mats is often preferred over full-length rails. Follow your care plan and any clinician guidance on rail use.
- Caregiver handling. If staff will reposition or change a resident in bed, an electric height adjustment saves backs, since caregivers can raise the deck to working height.
- Weight and size. Check the safe working load and deck width against each resident. A bariatric resident needs a frame rated for that load, not a standard bed pushed to its limit.
- Pressure risk. Residents who spend most of the day in bed may need a pressure redistribution surface. Plan the mattress together with the frame.
Fitting beds into residential rooms
Residential bedrooms were not designed around hospital equipment. Before you buy, measure each room and the path to it. A typical hospital bed frame runs close to 7 feet long and about 3 feet wide, and the full length grows when the head and foot sections move. Leave enough space on at least one side for a caregiver, a lift or a wheelchair, and check that the bed can roll out of the room in an emergency.
Look at hallway corners, interior door widths and any steps between the entry and the bedroom. Many electric beds come apart into a head section, foot section and deck so they can be carried through tight spaces and assembled in the room. Ask how the bed breaks down before delivery day.
Power matters too. Older homes may have few outlets, and a bed should plug directly into a wall outlet rather than a power strip or extension cord. Route the cord so it cannot be pinched when the bed lowers.
Building a small fleet
With six to eight beds, standardizing pays off. When every bed is the same model or family, staff learn one set of controls, one way to lock casters and one way to lower the bed for transfers. Spare parts such as hand controls, casters and side rails also become interchangeable, which shortens repairs when there is no spare bed to use.
Many providers buy beds in stages: a few when the home opens, then more as residents are admitted. If you plan that way, choose a model that will still be easy to source later so the fleet stays matched. Reconditioned beds help here, because the cost per bed is lower and matching units are often available in quantity.
Inspection and record keeping
Licensed homes are inspected, and equipment condition is part of a safe environment. Keep a simple log for each bed with the model, serial number, delivery date and any repairs. Check function on a routine schedule: run the motors through their full range, test the hand control lockouts, confirm the casters lock and roll freely, and look for cracked mattress covers. A short written checklist helps when staff turn over.
Clean and disinfect beds between residents following the manufacturer's instructions and your infection control policy. Pay special attention to rail latches, hand controls and the seams of the mattress cover.
Buying new or reconditioned
A new bed comes with the manufacturer's warranty and the newest features. A reconditioned bed costs considerably less and, when inspected and repaired properly, performs the same daily tasks. For many adult family homes, reconditioned electric beds are a practical way to equip every room without stretching the opening budget. Reconditioned beds from Mr. Biomed Tech Services come with a 90-day warranty, and our CBET-certified engineers inspect frames, motors and controls before a bed ships.
If you would rather not buy right away, our rental services can cover a short-term need, such as a resident on a trial stay.
Delivery and service in Yakima
Yakima is outside Texas, so beds ship by freight from our Garland headquarters, and we confirm the delivery date when you order. We provide on-site setup and service in Yakima, with visits scheduled in advance. Service requests receive a response in under 8 business hours, Monday through Friday. For ongoing support of beds and other equipment in a care home, see our home health equipment services.
To talk through beds for your adult family home, call (469) 767-8853 or contact us.
Shop hospital beds and other patient-care equipment online at our store, Mr. Bedmed.
Need a bed for a short stay at home or a census surge? See our hospital bed rental options across Texas.
On a budget? See our used hospital beds for sale, reconditioned and tested.
Leave a Comment
Comments [0]
No comments available for this blog.