Two ultrasound quotes for the same system can differ by thousands of dollars, and the difference is usually the probes. The console decides how the image is processed, but the probe decides what you can scan at all. For an Austin practice buying ultrasound, choosing the right set of probes is the most important part of the purchase. This guide explains the main probe types, which exams each covers, and how to build a probe set that fits your practice. Systems and probes are part of our new and refurbished medical equipment for sale.
The main probe types
| Probe | Footprint and frequency | Typical exams |
|---|---|---|
| Linear | Flat face, higher frequency (roughly 5–15 MHz); shallow, detailed images | Vascular, thyroid, breast, testicular, MSK, nerve blocks, IV and arterial line placement |
| Curvilinear (convex) | Curved face, lower frequency (roughly 2–6 MHz); deeper, wider field | Abdomen, kidneys, OB, pelvis, FAST exams |
| Phased array (sector) | Small face, low frequency; fits between ribs | Echocardiography, focused cardiac exams, some abdominal work |
| Endocavity | Narrow, internal-use probe | Transvaginal OB-GYN, transrectal prostate |
| Microconvex | Small curved face | Pediatrics, neonatal head, veterinary, tight spaces |
| Hockey stick | Very small linear, high frequency | Superficial MSK, hands and feet, small vessels |
| Volume (3D/4D) | Mechanical or matrix probe for volume imaging | OB surface rendering, some gynecology |
| Transesophageal (TEE) | Internal cardiac probe | Cardiac anesthesia and echo labs |
Frequency ranges are approximate and vary by model. A higher frequency gives finer detail but less depth, so a deep abdomen needs a lower-frequency curved probe and a superficial tendon needs a high-frequency linear probe.
Starter probe sets by practice type
- Primary care and urgent care: curvilinear plus linear covers abdominal, bladder, soft tissue and vascular access questions. Add a phased array if you do focused cardiac exams.
- OB-GYN: curvilinear and endocavity at minimum; a volume probe if you offer 3D/4D imaging.
- Sports medicine and orthopedics: high-frequency linear, plus a hockey stick for hands and feet.
- Vascular: linear and curvilinear, with a strong Doppler package on the system.
- Anesthesia and pain management: linear for blocks and line placement; curvilinear for deeper blocks.
- Cardiology: phased array, with TEE only if your team performs it.
Compatibility: the detail that catches buyers out
Probes are tied to specific system families and often to software versions. A probe that fits the connector may still not be supported by the software on your console. Before you buy a probe separately, confirm the exact probe model is supported on your exact system and software version. If you are buying a system and expect to add a probe later, check that the probe is still available new or refurbished.
Condition: how to judge a refurbished probe
A probe's condition shows in the image before it shows on the outside. Ask for a probe test that checks for dead elements, along with a phantom scan, and inspect the lens, housing, cable and connector yourself. Our probe testing walkthrough explains each check in detail.
Internal probes need more care
Endocavity and TEE probes contact mucous membranes. The AIUM cleaning guideline calls for high-level disinfection of internal transducers, with a single-use cover where feasible, and says to follow the manufacturer's list of compatible disinfectants. If you are adding an endocavity probe, budget for a high-level disinfection process as well as the probe itself.
Making probes last
Most probe damage is avoidable. Drops onto a hard floor crack lenses and break elements, so hang probes in their holders rather than leaving them on the table or the patient. Keep cables off the floor where chair wheels and carts can run over them. Wipe gel off promptly and use only the disinfectants the manufacturer lists for that probe, because some chemicals harden or crack the lens over time. Disconnect probes only with the system frozen or off, and keep connector caps on spare probes. Finally, look at every probe each morning; a small crack caught early is a repair, not a replacement.
How probe choices change the price
- Each additional probe adds cost, so buy the probes you will use now and confirm others can be added later.
- Specialty probes, such as TEE and volume probes, are usually the most expensive.
- A system sold with one probe can look inexpensive until the second probe is quoted.
- Probe repair is often far less costly than replacement, so ask whether repair is available for the probes you choose.
Buying in Austin
Austin is about 195 miles from our Garland headquarters. We confirm delivery and installation dates when you order, and probe tests and service visits are scheduled. Service requests receive a response in under 8 business hours, Monday through Friday. Reconditioned systems and probes come with a 90-day warranty. If you have not yet chosen between a cart, portable or handheld system, start with our Austin ultrasound form-factor guide; for probe repair and rentals, see our ultrasound repair, sales and rental page.
Replacing a damaged probe on a system you already own? Our guide to ultrasound replacement parts explains how to match and test probes.
To build a probe set for your practice, call (469) 767-8853 or send us a request with the exams you perform.
Related guide: Ultrasound Machine for Sale in San Antonio: The Full Cost
Leave a Comment
Comments [0]
No comments available for this blog.