Hospital Bed for Sale in Irving: What to Expect on Delivery Day

Home | Blog | Hospital Bed for Sale in Irving: What to Expect on Delivery Day
Hospital bed delivery in Irving

Most problems with a new hospital bed show up on delivery day: the bed won't fit through the door, the mattress is the wrong size, the outlet is on the other side of the room, or nobody shows the family how the rails work. For Irving hospitals, nursing facilities, home health agencies and families, a little preparation turns delivery day into a short, uneventful visit. This guide covers what to prepare, what should happen during setup, and what to check before the delivery team leaves. Beds are part of our new and refurbished medical equipment for sale.

Before delivery day

Measure the route

Measure every doorway, hallway turn and elevator between the entrance and the room. Most beds arrive partly assembled or in sections and can be built in the room, but tight turns and narrow bathroom-adjacent hallways still cause trouble. Note steps, ramps and thresholds, and tell the delivery team about them in advance.

Prepare the room

  • Clear space for the bed plus room to work on both sides; at home, that often means moving a regular bed out first.
  • Identify an outlet near the head of the bed. Electric beds should plug directly into the wall, not into an extension cord or power strip.
  • Plan where the bed will sit relative to the bathroom, windows and doorway; a bed that is easy to reach from the door helps caregivers and emergency responders.
  • In facilities, confirm nurse call and bed-exit connections if the bed will use them.

Confirm what is coming

Check the order: bed model, mattress, rails, hand control, IV pole or trapeze if ordered, and the number of beds. For facilities taking several beds, agree which room each bed goes to, so the team can deliver straight to the rooms.

During setup

  1. Assembly: the frame, headboard, footboard and rails are put together and tightened.
  2. Mattress fit: the mattress is placed and checked for a snug fit, with no wide gaps between the mattress and the rails or headboard.
  3. Power and battery: the bed is plugged in, the battery is checked and, on beds that have one, the battery backup is tested by unplugging the bed and lowering it.
  4. Function check: every motion is run through its full range: height, head, knee, Trendelenburg where fitted.
  5. Brakes and casters: the brakes are locked and the bed is checked for movement.
  6. Rails and CPR release: rails are raised, lowered and latched; the CPR release is demonstrated if the bed has one.
  7. Features: scale, bed-exit alarm and nurse call are tested where fitted.

The handover

Before the delivery team leaves, the people who will use the bed should be able to:

  • Raise, lower and position the bed with the hand control
  • Lock and release the brakes
  • Raise, lower and latch the rails
  • Use the lockout on the hand control if the patient shouldn't change the position
  • Find the manufacturer's instructions and the service contact

For families, ask the delivery team to walk through a typical day: getting in and out of bed, changing sheets with the bed raised, and lowering it at night.

Before you sign

  • Check the bed and mattress for damage from transport.
  • Confirm the serial number matches the paperwork.
  • Make sure you have the warranty terms and the test record for refurbished beds.
  • Ask what happens to the packaging and to any old bed being removed.

The first week

Keep an eye on the bed for the first few days: listen for new noises, check the mattress stays in place, and make sure the cord isn't being pinched when the bed lowers. Report anything unusual early, while it is easy to fix. For bed safety and rail checks in more depth, see our bed safety guide; for families buying for home, our home hospital bed guide covers choosing the right bed.

Delivery and service in Irving

Irving is inside our Dallas–Fort Worth service area. For in-stock beds, delivery and setup can usually be scheduled the same day across Dallas–Fort Worth from our Garland headquarters. Service requests receive a response in under 8 business hours, Monday through Friday, with same-day on-site support across the metroplex. Every delivery includes assembly, mattress fitting, a function check and a walkthrough for staff or family. Reconditioned beds carry a 90-day warranty.

Delivering several beds to a facility

When a nursing facility or hospital unit receives a batch of beds, plan the order of rooms so the team can work along a corridor without blocking it, and schedule delivery away from meal times, shift changes and admissions. Assign one staff member to sign off each room, so the bed's serial number, location and test result are recorded as it is installed. That record becomes the start of each bed's maintenance history, and it makes the first preventive maintenance round much faster.

To schedule a delivery in Irving, call (469) 767-8853 or send us a request with your address and access details.

Related guide: Hospital Bed for Sale in Richardson: Bed Controls and Lockouts

Shop hospital beds and other patient-care equipment online at our store, Mr. Bedmed.

Need a bed for a short stay at home or a census surge? See our hospital bed rental options across Texas.

On a budget? See our used hospital beds for sale, reconditioned and tested.

Need Immediate Biomedical Support?

Need an Ultrasound, C-Arm, X-Ray System, Hospital Bed, or Autoclave?

We provide affordable rental options and expert repair services for :

  • Complete Hospital Management
  • Cardiac Clinics
  • Dental Clinics
  • Free Standing ERs
  • Home Health
  • Podiatry
  • Pain Management Clinics
  • Primary Healthcare Centers
  • Surgery Centers
[email protected] +1 (469) 767 8853

Choose Services

Biomed Services

Consultancy

Dis-Positioning

Home Health

Inspection

New & Pre-owned equipment sales

Rental Services

Leave a Comment

Comments [0]

No comments available for this blog.

Service Request

×

Get This

Get A Quote