Hospital Bed Sale in Fort Worth: Long-Term Care and Entrapment Safety

Home | Blog | Hospital Bed Sale in Fort Worth: Long-Term Care and Entrapment Safety
Hospital bed for sale in Fort Worth

For Fort Worth skilled nursing facilities, assisted living communities and long-term care units, buying a hospital bed is as much a safety decision as a purchase. Residents are often frail, elderly or confused, and the gaps between a mattress, side rails and headboard can trap a person. This guide explains bed entrapment, what to look for in long-term care beds, and how to keep beds safe after they arrive. Beds are part of our new and refurbished medical equipment for sale.

Hospital bed for sale in Fort Worth

Why entrapment matters

According to the FDA's hospital bed page, the agency received 901 reports of patients caught, trapped, entangled or strangled in hospital beds between 1985 and 2013, including 531 deaths, and most of the patients were frail, elderly or confused. Many of these events involved side rails, mattresses that did not fit the frame, or gaps that opened as the bed moved.

The seven entrapment zones

FDA guidance on hospital bed system dimensions, developed with the Hospital Bed Safety Workgroup and described by Infection Control Today, identifies seven zones in a bed system where entrapment can occur. In plain terms:

  1. Within the rail: openings between the bars of a rail.
  2. Under the rail: the space between the bottom of a rail and the mattress.
  3. Between the rail and the mattress: the gap that widens when a mattress is too narrow or compresses.
  4. Under the rail at the ends: the gap that can open when the head or foot section is raised.
  5. Between split rails: the gap where two rail sections meet.
  6. Between the rail end and the headboard or footboard.
  7. Between the headboard or footboard and the mattress end.

The bed, rails and mattress work as one system. A safe bed can become unsafe with the wrong mattress or a rail from another model.

What to look for in a long-term care bed

  • Low height: a bed that lowers close to the floor reduces injury if a resident falls or slides out.
  • Rail options: half or assist rails rather than full rails, chosen after each resident's assessment.
  • Matching mattress: the mattress specified by the bed manufacturer, sized to the deck so gaps stay small.
  • Full-electric controls: staff can raise the bed to a safe working height and lower it after care, reducing back injuries.
  • Bed-exit alarm: useful for residents at high fall risk.
  • Locking casters: beds that stay put during transfers.

Rails: assess the resident first

FDA recommends assessing each patient's needs before using a side rail, consulting the bed manufacturer and the facility's risk manager, and it points facilities to bed safety measurement tools. Rails help some residents reposition and get out of bed, but for others they increase the risk of entrapment or falls from climbing over them. Many facilities use low beds, floor mats and assist bars instead of full rails for residents who are confused or restless.

Refurbished beds in long-term care

Refurbished long-term care beds can be an economical way to replace an aging fleet, provided the bed, rails and mattress are checked together. Before delivery, every refurbished bed should have its rails checked for secure latching and wear, gaps measured with the correct mattress fitted, and motors, controls and brakes tested. Our refurbished hospital bed checklist lists the full set of checks. Reconditioned beds from us carry a 90-day warranty.

A simple bed safety program

  1. Keep an inventory of every bed, rail type and mattress model.
  2. Check new and replaced mattresses fit the bed before use.
  3. Measure gaps when beds, rails or mattresses change, and at regular intervals.
  4. Assess each resident before using rails, and record the decision.
  5. Remove damaged rails or mismatched mattresses from service.
  6. Include beds in preventive maintenance: motors, controls, brakes, rails and alarms.

Training staff

Every caregiver who uses the beds should know how to lower the bed after care, lock the casters, raise and latch rails correctly, and recognize a mattress that has shifted or a gap that has opened. A short demonstration on delivery day, repeated for new staff, prevents most problems.

Mattresses and pressure injuries

Residents who spend long hours in bed also need protection from pressure injuries. Pressure-redistributing foam and powered mattresses help, but any change of mattress must still fit the bed frame to avoid creating gaps. Our guide to hospital bed mattresses explains the options.

Delivery and service in Fort Worth

Fort Worth is inside our Dallas–Fort Worth service area. In-stock beds can usually be delivered and set up the same day, with the mattress fitted and rails checked in the resident's room. For larger orders, we schedule delivery around your admissions. Service requests receive a response in under 8 business hours, Monday through Friday, with same-day on-site support. For a broader view of buying in the metroplex, see our Dallas–Fort Worth hospital bed guide.

To plan long-term care beds for your facility, call (469) 767-8853 or send us a request with the number of beds and your current models.

Related guide: Hospital Bed for Sale in Houston: Acute Care Beds and Fall Safety

Shop hospital beds and other patient-care equipment online at our store, Mr. Bedmed.

Need a bed for a short stay at home or a census surge? See our hospital bed rental options across Texas.

On a budget? See our used hospital beds for sale, reconditioned and tested.

Need Immediate Biomedical Support?

Need an Ultrasound, C-Arm, X-Ray System, Hospital Bed, or Autoclave?

We provide affordable rental options and expert repair services for :

  • Complete Hospital Management
  • Cardiac Clinics
  • Dental Clinics
  • Free Standing ERs
  • Home Health
  • Podiatry
  • Pain Management Clinics
  • Primary Healthcare Centers
  • Surgery Centers
[email protected] +1 (469) 767 8853

Choose Services

Biomed Services

Consultancy

Dis-Positioning

Home Health

Inspection

New & Pre-owned equipment sales

Rental Services

Leave a Comment

Comments [1]

Nisha

I want to buy a hospital bed. I need hand rails on both sides head and foot. I need it be height adjustable. I should be able to get in and out of the bed by myself using rhe handrails. Please note I have als and have little use of legs. My hands are getting weak.right now I am using the bed rails to get up from the bed.the height of the metal frame from floor is 16 inches and the mattress is 10 inches. Now my legs are giving up. I need to have a bed where I can adjust the height so that I can get up from the bed by myself. I dont have any care givers. I want to be independent as long as I can.

Service Request

×

Get This

Get A Quote